Hi- I'm John from Wilmington, Delaware and somewhat new to the group (although I've spent the last month studying all of the great resources available here). Since this is my first post I thought I'd briefly introduce myself. I'm a computer scientist with minimal mechanical experience (which recently changed),and about a month ago decided I wanted to drive a vintage looking scooter. By chance I found one for $100 and you guessed it, it was a 1981 c70 passport. I won't go into too many details, but I fell in love during the restoration project and now also sprung on a 1982. So hi, and thanks for all the great resources. My question:
In reference to the discussions about cleaning the press fit slow jet on the stock '81 carb with something like a BBQ brush wire and the actual jet being slightly recessed, could anyone give me an approximate (or precise) length in mm of how deep such a gauge wire should penetrate through the opening on the brass end?
Thanks,
John
1970-73 C70 Honda Service Manual: http://tinyurl.com/6ebwtw
1970-73 C70 Troubleshooting Guide:
http://tinyurl.com/6ebwtw (scroll to sec.7.1 page 101.jpg)
1980-83 C70 Honda Service Manual: http://tinyurl.com/hu42c
1980-81 C70 Troubleshooting Guide:
http://tinyurl.com/hu42c (scroll to sec.18-1 page 170.jpg)
1982-83 C70 Troubleshooting Guide:
http://tinyurl.com/hu42c (scroll to sec. 20-28 page 205.jpg)
1980-81 C70 Maintenance Schedule: http://tinyurl.com/z4zn6
1982-83 C70 Maintenance Schedule: http://tinyurl.com/hw35c
More resources for C70 Passports and Cubs:
http://www.shlaes.com/Vehicles/Scooter.htm
http://www.velodrome.com/HondaC70/HondaC70.html
No comments:
Post a Comment