Thanks Mike G. ILL try a few of your tips. . Also parting out 1970 C 70 have frame and engine and front forks and swing arm and center stand. Thomas
--- On Mon, 6/27/11, Mike Gladu <mgladu@mindspring.com> wrote:
From: Mike Gladu <mgladu@mindspring.com>
Subject: Re: [Honda-C70] why does my engine kick over part and then slip on the down swing
To: Honda-C70@yahoogroups.com
Date: Monday, June 27, 2011, 11:00 AM
At 10:46 AM -0700 6/27/11, thomas earsley wrote:
>it kicks over like a regular engine but at the bottom of the kick
>there is no feel of turning anything Mike. Thomas
I would test compression before opening up the engine. Just to make
sure what you're feeling is the clutch and not the top end (rings,
valves, etc) returning too little resistance.
That, and change the oil to something known-good (SG 30w). This
should eliminate any minor or non-invasive slippage fixes.
If it still slips, it's time to go in.
Plates and springs at the same time.
Mike G.
-
[Non-text portions of this message have been removed]
1970-73 C70 Honda Service Manual: http://tinyurl.com/6ebwtw
1970-73 C70 Troubleshooting Guide:
http://tinyurl.com/6ebwtw (scroll to sec.7.1 page 101.jpg)
1980-83 C70 Honda Service Manual: http://tinyurl.com/hu42c
1980-81 C70 Troubleshooting Guide:
http://tinyurl.com/hu42c (scroll to sec.18-1 page 170.jpg)
1982-83 C70 Troubleshooting Guide:
http://tinyurl.com/hu42c (scroll to sec. 20-28 page 205.jpg)
1980-81 C70 Maintenance Schedule: http://tinyurl.com/z4zn6
1982-83 C70 Maintenance Schedule: http://tinyurl.com/hw35c
More resources for C70 Passports and Cubs:
http://www.shlaes.com/Vehicles/Scooter.htm
http://www.velodrome.com/HondaC70/HondaC70.html
No comments:
Post a Comment