[Honda-C70] Re: Needing help with 1982 C70 Passport muffler replacement...

 

Hello Liz,

I must be dreaming, but didn't we go through this in message #40990? Same page, figures, etc. Take some pictures, put in the photos section of this group, with any questions!

Ron in NJ

--- In Honda-C70@yahoogroups.com, Liz <veap29@...> wrote:
>
> Thank you very much Bill!
> This is great!
> I really appreciate all of the information.
> Liz :)
>
> Motivation is what gets you started. Habit is what keeps you going.
>
> --- On Mon, 6/6/11, william belleau <wjbelleau@...> wrote:
>
> From: william belleau <wjbelleau@...>
> Subject: Re: [Honda-C70] Needing help with 1982 C70 Passport muffler replacement...
> To: Honda-C70@yahoogroups.com
> Date: Monday, June 6, 2011, 9:30 PM
>
> From: william belleau <wjbelleau@...>
>
> Subject: Re: [Honda-C70] Needing help with 1982 C70 Passport muffler replacement...
>
> To: Honda-C70@yahoogroups.com
>
> Date: Monday, June 6, 2011, 7:11 PM
>
> Liz
>
> First thing, when you are looking at the emails, is there a section at the bottom of the screen that starts with C70 passport not running right?
>
> That is a group of manuals to help you work on the C70.
>
> Scroll down to "1980-83 C70 Honda Service Manual: http://tinyurl.com/hu42c "
>
> When you get that open you scroll down to section 5-2, the picture in the middle is
>
> the removal of the muffler. The front two nuts are the "setting nuts", the two in the rear are the "mounting nuts", you remove the nuts (4ea) and the pipe / muffler will come off.
>
> To install, just reverse the process. (sorry that is all Honda says) but really that is
>
> all it takes. You remove the old gasket at the cylinder head exhaust port. install a
>
> new gasket, install the new  pipe / muffler. I try to put new nuts on the studs on the head
>
> as the heat will ruin them. I also use HI temp antiseeze on the threads.
>
> The nuts on the head are 6mm so a torque of 6-9 ft-lbs. The rear nuts are 8mm so
>
> a torque of 13-18 ft-lbs..
>
> Bill
>
> Portland OR 
>
> --- On Mon, 6/6/11, Liz <veap29@...> wrote:
>
> From: Liz <veap29@...>
>
> Subject: [Honda-C70] Needing help with 1982 C70 Passport muffler replacement...
>
> To: Honda-C70@yahoogroups.com
>
> Date: Monday, June 6, 2011, 6:45 PM
>
> I bought a Haynes manual for the 1982 C70 Honda Passport, and it does have some information for the exhaust, air filter replacement, but doesn't cover the muffler replacement.
>
> Where can I get detailed instructions for the muffler replacement?
>
> I have the new muffler from Dratv, and I have the tools, and even a torque wrench. :)
>
> Just need a step by step or something close to it.
>
> Thank you in advance!
>
> Liz :)
>
>

__._,_.___

Reply to sender | Reply to group | Reply via web post | Start a New Topic

Messages in this topic (7)

Recent Activity:

• New Members 25
• New Photos 5

Visit Your Group

C70 Passport Not Running Right?
1970-73 C70 Honda Service Manual: http://tinyurl.com/6ebwtw
1970-73 C70 Troubleshooting Guide:
http://tinyurl.com/6ebwtw (scroll to sec.7.1 page 101.jpg)
1980-83 C70 Honda Service Manual: http://tinyurl.com/hu42c
1980-81 C70 Troubleshooting Guide:
http://tinyurl.com/hu42c (scroll to sec.18-1 page 170.jpg)
1982-83 C70 Troubleshooting Guide:
http://tinyurl.com/hu42c (scroll to sec. 20-28 page 205.jpg)

1980-81 C70 Maintenance Schedule: http://tinyurl.com/z4zn6
1982-83 C70 Maintenance Schedule: http://tinyurl.com/hw35c

More resources for C70 Passports and Cubs:
http://www.shlaes.com/Vehicles/Scooter.htm
http://www.velodrome.com/HondaC70/HondaC70.html

Switch to: Text-Only, Daily Digest • Unsubscribe • Terms of Use

.

__,_._,___